Home / Products / Mobile coverage solutions /
oDAS RADIUS

oDAS RADIUS

oDAS RADIUS application

Outdoor Distributed Antenna System

The system provides cellular coverage due to serial distribution of a base station (BTS) sectors.

Purpose

oDAS RADIUS is intended to provide cellular coverage along railways, roads and rural areas. The system allows increasing network capacity efficiency.

The system is designed for integration with LTE FDD, UMTS, GSM (GSM-R) networks, and provides serial distribution of a base station (BTS) sectors (frequency bands) at the distance of 60 km reducing infrastructure cost (CAPEX/OPEX).

Application

  • cellular coverage (GSM, UMTS, LTE) of blind areas
  • cellular coverage of rural areas
  • cellular coverage along railways and roads
  • cellular coverage of oil&gas infrastructure areas

Operation principle

oDAS RADIUS configuration

The RADIUS FSC unit is installed at the site with a base station and receives the GSM, LTE, UMTS carriers from it. Then the unit converts them and transmits via MWL or fiber optic over a distance.

The oDAS RADIUS FSR unit is installed at the remote site. It receives the carriers using MWL or fiber optic and provides creation of several sectors similar to that of the BTS. In addition, it amplifies and transmits the received signals further along the line to the next site equipped with oDAS RADIUS products.

oDAS RADIUS

Parameter Value
Type of the units’ connection — micro­wave link (MWL)
— fiber optic (FO)
Number of the retransmission hops (MWL) GSM/UMTS — up to 3, LTE — up to 2
Number of the retransmission participants (fiber optic) 4 and more (depending on the distance between FSC unit and the last FSR unit in the line and from the number of repeated retransmission in the retransmission line of the one carrier frequency nominal (GSM / LTE / UMTS)
Parasitic noise level intro¬duced by the system into the communication line ≤ 3 dB (for maximum number of hops and different nominals of GSM / LTE / UMTS carrier frequencies transmitted in each hop)
Compliance with international standards ETSI TS 125 106, ETSI TS 136 106, ETSI TS 145 005, ITU-R F.384-11 (03/2012)
Management and control — locally (Ethernet)
— remotely (via the built-in GSM / UMTS / LTE modem)
Retransmission channel (MWL)
Frequency band 6590—7100 MHz
Total frequency band width up to 50 MHz
Transmitter output power in the retransmission channel of the FSC / FSR unit up to 23 dBm
Integrated wireless router in the retransmission channel (MWL)
Type of the wireless connection point-to-point or serial relay connection
The frequency band allocated for a high-speed data transmission line in the retransmission channel 5 / 10 / 15 / 20 MHz
Bitrate in the line up to 50 Mbit
Type of modulation up to 64 QAM

FSC unit

Parameter Value
Possible combinations of signals (fiber optic)
Retransmitted signals from FSС / FSR (fiber optic) — up to 3 pairs of signals with a total frequency band of each pair of not more than 50 MHz
— each pair of signals supports its frequency range
— each pair of signals supports up to 4 LTE / UMTS carriers and up to 8 GSM carriers
MIMO support (fiber optic) up to 3 pairs of MIMO 2x2 signals
Possible combinations of signals (MWL)
Retransmitted signals from BTS to FSR (MWL) — up to 2 pairs of signals of the total bandwidth of all signals of up to 50 MHz
— each pair of signals supports up to 4 LTE / UMTS carriers and up to 8 GSM carriers
MIMO support (MWL) up to 2 pairs of MIMO 2x2 signals
Number of the inputs/outputs from the BTS (fiber optic) up to 6
Number of the inputs/outputs from the BTS (MWL) up to 4
Number of the optic connectors in the FSC unit 2
Maximal signal level at the FSC input up to 48 dBm
Type of connectors to connect optic transceivers SFP+
Number of the integrated transceivers of the module and the antenna’s inputs of the retransmission channel up to 2
Delay per unit 6 ms
Type of the unit synchronization GPS / GLONASS
Housing protection rating IP65
Overall dimensions 161х358х593 mm
Weight from 12 kg — depending on the package (the number of the transceivers of the retransmission channel and the number of the supported inputs//outputs from/to BTS
Power consumption up to 35 W (fiber optic)
up to 95 W (MWL)
Supply voltage –48 V
Working temperature range –40…+55 °C
–60…+55 °C (optional)

FSR unit

Parameter Value
Possible combinations of signals (fiber optic)
Retransmitted signals from BTS to FSR (fiber optic) — up to 3 pairs of signals with a total frequency bandwidth of each pair of not more than 50 MHz (each pair of signals supports its own frequency range)
— each pair of signals supports up to 4 LTE / UMTS carriers and up to 8 GSM carriers
MIMO support (fiber optic) up to 3 pairs of MIMO 2x2 signals
Possible combinations of signals (MWL)
Retransmitted signals from FSC / FSR (MWL) — up to 2 pairs of signals with a total frequency bandwidth of all signals of up to 50 MHz
— each pair of signals supports up to 4 LTE / UMTS carriers and up to 8 GSM carriers
MIMO support (MWL) up to 2 pairs of MIMO 2х2 signals
Number of the GSM / UMTS / LTE transceivers supported by the FSR unit (fiber optic) up to 6
— for SM module it is possible to connect external transceivers
Number of the GSM / UMTS / LTE transceivers supported by the FSR unit (MWL) up to 4
— for SM module it is possible to connect external transceivers
Number of the pluggable external GSM / UMTS / LTE transceivers (SM module) up to 2
Number of the carrier frequencies for the one GSM / UMTS / LTE transceiver of the FSR unit up to 2
Maximal output power of the GSM / UMTS / LTE transmitter from 40 to 48 dBm depending on the type of the connected transceiver
Type of the connector to connect optic transceivers SFP+
Number of the integrated transceivers of the module and the antenna’s inputs of the retransmission channel up to 2
Type of the unit synchronization GPS / GLONASS
Delay per unit 6 ms
Housing protection rating IP65
Overall dimensions 161х358х593 mm
Weight from 12 kg — depending on the package (the number of the transceivers of the retransmission channel and the number and types of the GSM / UMTS / LTE transceivers)
Power consumption, a unit without a transmitter up to 100 W (fiber optic)
up to 200 W (MWL)
Supply voltage –48 / 220 V
Working temperature range –40…+55 °C
–60…+55 °C (optional)

Transceivers, SM module (outdoor version)

Parameter Vale
Transceivers of 1800 MHz band
Operating frequency range 1710—1785 — UL, 1805—1880 — DL MHz
Power consumption 40 / 48 dBm
Power consumption 45 / 200 W
Overall dimensions for the outdoor SM module 73х152х285, 161х358х593 mm (SM module with two integrated transceivers)
Number of НF connectors for connecting the SM module to the FSR unit 3 (RX, TX, FB)
SM module power supply via НF-link
Transceivers of 900 MHz band
Operating frequency range 873—915 — UL, 918—960 — DL MHz
Transmitter output power 43 dBm
Power consumption 110 W
Overall dimensions for the external SM module 161х358х593 mm (SM module with two integrated transceivers)
Number of HF connectors for connecting the SM module to the FSR unit 3 (RX, TX, FB)
SM module power supply via HF-link
Transceivers of 2100 MHz band
Operating frequency range 1920—1980 — UL, 2110—2170 — DL MHz
Output power of the transmitter 40 dBm
Power consumption 45 W
SM module overall dimensions 73х152х285 mm
Number of HF connectors for connecting the SM module to the FSR unit 3 (RX, TX, FB)
SM module power supply via HF-link

Contacts

Sergey Nevyantsev

Sergey Nevyantsev
Commercial Director

+7 3412 500 505
Send message

Porymov Andrey

Porymov Andrey
Project manager

+7 3412 430 568
Send message

Base radio/ DMR RB011 standard repeater

Base radio/ DMR RB011 standard repeater

Designed for operation in analog and digital radio communication networks as a base radio / repeater

Mobile Radio System of DMR standard

Mobile Radio System of DMR standard

Mobile Radio System is designed to provide the conventional operative technological radio communication in analog and digital modes.

oDAS RADIUS

oDAS RADIUS

Outdoor Distributed Antenna System RADIUS is intended to provide GSM-R, LTE, UMTS, and GSM coverage along railways, roads and rural areas.